Showing all 8 results
We’ve gathered all of the features that you might need in order to make your store online in this theme.
The AT89C55 is a 8-bit low-power High-performance CMOS Microcontroller with 20kB of flash programmable read only memory and 256 bytes of RAM. The device is manufactured using Atmel’s high-density non-volatile memory technology and is compatible with the industry standard 80C51 and 80C52 instruction set and pinout. The on-chip Flash allows the program memory to be…
ATmega328P Microcontroller is the most widely used standalone Atmega IC for electronics projects. It can be connected to an Atmega328 board as a replacement for an Arduino. However, if you are planning to replace the Arduino chip then we can provide you Atmega328p with the Arduino bootloader. This microcontroller does not come with the bootloader pre-installed. It is a low…
ATMEGA32A is a 40 pin, 8-bit AVR RISC-based microcontroller from Atmel. It is a low power, high performance microcontroller featuring 32KB self-programming flash program memory, 2KB SRAM, 1KB EEPROM, 8 channel 10-bit A/D converter and JTAG interface for on-chip-debug. The device acheives 16 MIPS throughput at 16 Mhz at 2.7-5.5V operation. By executing powerful instructions…
Atmega8A is a high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP flash memory, 1KB SRAM, 512B EEPROM, an 7-channel/10-bit A/D converter (TQFP and QFN/MLF), and debugWIRE for on-chip debugging. The device supports a throughput of 16 MIPS at 16 MHz and operates between 4.5-5.5 volts.. By executing powerful instructions in a single clock…
ATtiny85 is a small 8-pin microcontroller from Atmel and is based on Atmel’s 8-bit RISC architecture. ATtiny85 is a high-performance, low-power microcontroller which combines 8KB ISP flash memory, 512B EEPROM, 512-Byte SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal…
The PIC18F4550 is a 28/40/44-Pin, High-Performance, Enhanced Flash, USB Microcontrollers with nanoWatt Technology. The following are the features:- • High-Current Sink/Source: 25 mA/25 mA • Three External Interrupts • Four Timer modules (Timer0 to Timer3) • Up to 2 Capture/Compare/PWM (CCP) modules: – Capture is 16-bit, max. resolution 5.2 ns (TCY/16) – Compare is 16-bit, max….
MICROCHIP’S SST89E516RD IS A 8051 BASED MICROCONTROLLER. IT IS PIN TO PIN AND CODE TO CODE 100% EQUIVALENT TO NXP’S P89V51RD2. THE MAIN ADVANTAGE OF USING SST89E516 IS IT HAS A INBUILT BOOTLOADER AND IT CAN BE SERIALLY PROGRAMMED THROUGH PC USING EASY IAP SOFTWARE.THE IC IS SUPPORTED IN KEIL C51 AS SST89X516RD2 FOR COMPILING AND SIMULATION….
We’ve gathered all of the features that you might need in order to make your store online in this theme.
Copyright © 2021 - Venam All Rights Reserved.
