Showing 601–608 of 844 results
We’ve gathered all of the features that you might need in order to make your store online in this theme.
It is a miniature module for amateur projects. Simply connect a 4-8 Ohm speaker and amplify your sound. It can be used with the FM receiver kit or WTV020SD-16P music module. You can definitely use this module for other musical projects also. The chip pin leads can directly input audio signal. Features: Onboard LM386 Chip….
The LM386 is power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200. The inputs are ground…
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors. This feature is one that allows…
The LM3915 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDS, LCDs or vacuum fluorescent displays, providing a logarithmic 3 dB/step analog display. One pin changes the display from a bar graph to a moving dot display. LED current drive is regulated and programmable, eliminating the need for current limiting…
The LM193 series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current…
The LM393 series are dual independent precision voltage comparators capable of single or split supply operation. These devices are designed to permit a common mode range−to−ground level with single supply operation. Input offset voltage specifications as low as 2.0 mV make this device an excellent selection for many applications in consumer, automotive, and industrial electronics….
The LM567 is general purpose tone decoders designed to provide a saturated transistor switch to ground when an input signal is present within the pass band. The circuit consists of an I and Q detector driven by a voltage controlled oscillator which determines the center frequency of the decoder. External components are used to independently…
We’ve gathered all of the features that you might need in order to make your store online in this theme.
Copyright © 2021 - Venam All Rights Reserved.
